Ion Series Intel Linux Servers

Ion 2200 Linux Server - Specifications

Ion 2200 Linux Server

CHASSIS:
- 2U Form Factor

CPU:
* Dual 771-pin LGA Sockets
* Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
o Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
o Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz
o NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors

SYSTEM BUS:
* 1333 / 1066 / 667 MHz system bus

OPERATING SYSTEMS:
* Supports 64-bit Operating Systems
* Supports 32-bit Operating Systems

MEMORY CAPACITY:
* Sixteen 240-pin DIMM sockets
* Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
* Dual branch memory bus
* Memory must be populated in pairs
* Memory Mirroring supported

MEMORY TYPE
* 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM SIZES:
* 512 MB, 1GB, 2GB, 4GB

MEMORY VOLTAGE:
* 1.8V only
* 1.5V(AMB)

ERROR DETECTION:
* Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
* Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

CHIPSET:
* Intel® 5000P (Blackford) chipset
* MCH + PXH + ESB2

SATA:
* Intel ESB2 SATA 3.0Gbps Controller
* RAID 0, 1, 5, 10 support (Windows Only)
* RAID 0, 1, 10 support (Linux)

IPMI:
* Support for Intelligent Platform Management Interface v.2.0
* 200-pin IPMI slot (SIMLP)
* (Optional: AOC-SIMLP-B)
* (Optional: AOC-SIMLP-3) with 3rd LAN support

NETWORK CONTROLLERS:
* Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
* Intel® I/OAT support for fast, scaleable, and reliable networking

GRAPHICS
* ATI ES1000 controller with 16 MB of video memory

SUPER I/O:
* Winbond 83627HG chip

SERIAL ATA:
* Six Serial ATA ports
* Six SATA hard drives supported

IDE:
* Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
* Compact Flash (40-pin connector, IDE 1, single channel) slot
* Supports UDMA Mode 5, PIO Mode 4, and ATA/100

LAN:
* 2x RJ45 LAN port

USB:
* 2x USB rear ports
* 3x USB internal headers
* Total 5 USB 2.0 Compliant / 1.1 Compliant

VGA:
* 1x VGA Port

KEYBOARD / MOUSE:
* PS/2 keyboard and mouse ports

SERIAL PORT / HEADER:
* 1 Fast UART 16550 serial port
* 1 Fast UART 16550 serial header

PARALLEL PORT:
* 1 ECP / EEP parallel port

BIOS TYPE:
* 8Mb Flash EEPROM with Phoenix® BIOS

BIOS FEATURES:
* Plug and Play (PnP)
* SMBIOS 2.3
* DMI 2.1
* PCI 2.2
* ACPI 1.0
* USB Keyboard support
* Hardware BIOS Virus protection

DIMENSIONS:
- Height 3.5" (89mm)
- Width 17.2" (437mm)
- Depth 25.5" (648mm)
- Gross Weight 55 lbs (24.9kg)
- Available Colors Silver, Black

FRONT PANEL BUTTONS:
• Power On/Off button
• System Reset button

FRONT PANEL LEDs:
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED

FRONT PANEL PORTS:
• 2x USB Ports + DB9 COM Port (optional)

PCI-EXPRESS EXPANSION SLOTS:
* 2 (x8) PCI-e slots
* 1 (x4) PCI-e (using x8) slot

PCI-X EXPANSION SLOTS:
* 2x 64-bit 133MHz PCI-X (3.3V) slots
* 1x 64-bit 100MHz PCI-X (3.3V) slot

HOT-SWAP DRIVE BAYS:
* 8x 3.5"SATA Hot-swap drive trays
* Supports up to 6x SATA hard drives

DVD-ROM:
* Slim 8x DVD, 24x CD, DVD-ROM Drive

SATA BACKPLANE:
* 1x 2U SATA backplane

SYSTEM COOLING FANS:
* 3x 80mm 6300 RPM fans

SHROUD:
* 1x Air Shroud

POWER SUPPLY:
* (1 + 1) Redundant 700W AC-DC power supply w/ PFC
AC Voltage - 100 - 240V, 60-50Hz, 10 - 4 Amp
+5V standby - 4 Amp
+12V - 57 Amp

PC HEALTH MONITORING:
* Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
* 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN:
* Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
* 8x fans with tachometer status monitoring
* Status monitor for speed control
* Status monitor for on/off control
* Low noise fan speed control
* Pulse Width Modulated (PWM) fan connectors

TEMPERATURE:
* Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Control for 8x fan connectors
* PSU I2C temperature sensing logic
* Thermal Monitor 2 (TM2) support

LED:
* CPU / System Overheat LED

OTHER FEATURES:
* Chassis intrusion detection
* Chassis intrusion header
* SDDC Support

OPERATING ENVIRONMENT / COMPLIANCE ENVIRONMENTAL SPEC.:
* Operating Temperature: 10º to 35º C (50º to 95º F)
* Non-operating Temperature: -40º to 70º C (-40º to 158º F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing)

 
Live Chat Now!
Live Chat Now
Live Chat: Sales Rep
POGO FOCUS
Custom Quote